Product Specifications

Product Type: Outdoor LED Wall Light
Style: Modern
Design: Square Wall Sconce with Natural Stone Finish
Material: Yellow Travertine Stone
Light Source: LED
Bulb Included: Yes
Bulb Base: Wedge
Color Temperature Options: Warm White (3000K), Neutral White (4000K), and Cool White (6000K)
Luminous Flux: 249–2,000 Lumens
Power Source: AC
Voltage: 85–265V
Installation Method: Self-Contained
Protection Rating: IP54
Water Resistance: Water-Repellent
Width: 5"–8.9"
Length: 12"–16.9"
Height: 4"–7.9"
Weight: 3 lb or More
Smart Device: No
Recommended Spaces: Porch, Courtyard, Hallway, Stairway, and Other Outdoor Areas
Warranty: 1 Year
Certifications: RoHS, LVD, CE, and CCC
Origin: Mainland China

Installation Guide

General Guidelines

• Designed for wall-mounted home lighting using a self-contained installation method.
• Suitable for outdoor or semi-outdoor areas such as a porch, courtyard, hallway, or stairway.
• Features a square design with a yellow travertine-style stone finish.
• Uses an included LED light source.
• Available light colour options may include:Warm White: 3000KNeutral White: 4000KCool White: 6000K
• Operates on 85–265V AC power.
• Features an IP54 water-repellent protection rating.
• Approximate fixture measurements:Width: 5–8.9 inchesLength: 12–16.9 inchesHeight: 4–7.9 inches
• Fixture weight is 3 lb or more.
• Turn off the main electrical supply before installation.

Tools You May Need

• Screwdriver
• Voltage tester
• Measuring tape
• Pencil for marking
• Drill, if required for the wall surface
• Wall plugs and mounting screws supplied with the fixture, if included

Installation Steps

Step 1: Unpack and Inspect – Remove all packaging and check the stone-finish lamp body, included LED light source, mounting plate, wiring, seals, and supplied hardware for damage or missing parts.

Step 2: Confirm the Light Colour – Check whether the selected model uses 3000K, 4000K, or 6000K lighting before installation.

Step 3: Choose the Mounting Position – Select a stable wall with enough clearance for the complete fixture. Ensure the location is suitable for an IP54 water-repellent wall light.

Step 4: Turn Off the Power – Switch off the wall-light circuit at the breaker panel. Use a voltage tester to confirm that the wiring is not live.

Step 5: Mark the Fixing Points – Hold the mounting plate against the wall and mark the screw positions. Make sure the mounting plate is level.

Step 6: Install the Mounting Plate – Drill holes if necessary, insert suitable wall plugs, and secure the mounting plate firmly using the appropriate screws.

Step 7: Connect the Power Supply – Connect the wall lamp to a compatible 85–265V AC power supply according to the included product instructions. Ensure all electrical connections are secure, properly insulated, and protected from moisture.

Step 8: Attach the Lamp Body – Position the fixture over the installed mounting plate and secure it firmly using the supplied fasteners.

Step 9: Check the Seals and Mounting – Confirm that the lamp sits securely against the wall and that all protective seals remain correctly positioned.

Step 10: Restore Power and Test – Turn the electrical power back on and test the included LED light using the connected wall control.

Important Tips

• Confirm that the available electrical supply is within the supported 85–265V AC range.
• Make sure the wall and mounting hardware can support a fixture weighing 3 lb or more.
• IP54 protection helps resist dust and water splashes but does not make the lamp suitable for submersion or continuous high-pressure water exposure.
• Do not damage, remove, or modify the protective seals during installation.
• Do not install, adjust, or clean the lamp while the electrical power is on.
• Handle the stone-finish body carefully to prevent chips, cracks, or scratches.
• Clean the fixture using a soft, dry or slightly damp cloth.
• Contact a qualified electrician if you are unfamiliar with hardwired outdoor wall-light installation.