Product Specifications

Product Type: Indoor LED Wall Lamp
Brand: CYLRDXK
Model Number: LWL-SY12
Style: Contemporary Minimalist
Design: Double Geometric Wall Light
Color Options: White or Black
Body Material: Aluminum and Painted Iron
Diffuser Material: Borosilicate Glass
Finish: Brushed Nickel
Light Source: Integrated LED
LED Type: SMD 5730
LED Quantity: 20
Wattage: 10W
Light Color Options: Warm White (3000K), Natural White (4000K), and Cool White (6000K)
Dimmable: No
Luminous Efficiency: 80–90 Lumens per Watt
Beam Angle: 30°–40°
Power Source: AC
Voltage: 85–265V, 50/60Hz
Control Type: Push Button
Installation Method: Self-Contained
Protection Rating: IP55
Water Resistance: Water-Repellent
Dimensions: 4" Length x 4" Width x 8.3" Height (10.2 x 10.2 x 21 cm)
Weight: Up to 1 lb
LED Lifespan: More Than 50,000 Hours
Recommended Use: Bedroom, Hallway, Corridor, Bathroom, Restroom, and Bedside Lighting
Bulb Included: No
Smart Device: No
Warranty: 1 Year
Certification: CE
Origin: Mainland China

Installation Guide

General Guidelines

• Designed for indoor wall-mounted installation using a self-contained method.
• Suitable for spaces such as bedrooms, hallways, corridors, and restrooms.
• Features a modern geometric design with an upward and downward lighting effect.
• Operates on 85–265V AC, 50/60Hz.
• Uses a built-in 10W SMD 5730 LED light source.
• Available light colours may include:Warm White: approximately 3000KNatural White: approximately 4000KCool White: approximately 6000K
• The lamp is not dimmable.
• Operates using a push-button control or connected wall control, depending on the supplied model.
• Product information lists both aluminium and painted iron construction. Check the received fixture before installation.
• Turn off the main electrical supply before beginning installation.

Tools You May Need

• Screwdriver
• Voltage tester
• Measuring tape
• Pencil for marking
• Drill, if required for the wall surface
• Wall plugs and mounting screws supplied with the fixture, if included

Installation Steps

Step 1: Unpack and Inspect – Remove all packaging and check the lamp body, glass diffuser, LED components, mounting plate, wiring, and supplied hardware for damage or missing parts.

Step 2: Confirm the Installation Location – Select a stable indoor wall with enough space for the complete fixture. Keep the lamp away from locations where it may be exposed to direct water.

Step 3: Turn Off the Power – Switch off the wall-light circuit at the breaker panel. Use a voltage tester to confirm that the wiring is not live.

Step 4: Remove the Mounting Plate – Separate the mounting plate or rear bracket from the wall lamp according to the supplied user manual.

Step 5: Mark the Fixing Points – Hold the mounting plate against the wall and mark the screw-hole positions. Ensure the plate is level.

Step 6: Install the Mounting Plate – Drill holes if required, insert suitable wall plugs, and secure the mounting plate firmly using the appropriate screws.

Step 7: Connect the Wiring – Connect the wall lamp to a compatible 85–265V AC power supply according to the included wiring instructions. Make sure all connections are secure and properly insulated.

Step 8: Attach the Wall Lamp – Position the lamp body over the installed mounting plate and secure it using the supplied screws or fasteners.

Step 9: Check the Lamp Position – Confirm that the fixture is straight, firmly mounted, and positioned correctly for the intended light direction.

Step 10: Restore Power and Test – Turn the power back on and test the lamp using the push button or connected wall control. Confirm that the selected warm, natural, or cool white version operates correctly.

Important Tips

• Confirm that the available electrical supply is within the supported 85–265V AC range.
• Do not connect the lamp to a dimmer switch.
• Do not install, adjust, or clean the fixture while the electrical power is on.
• Product information is inconsistent regarding water protection: one specification lists IP55 and water-repellent, while another states not waterproof. Use the fixture indoors and avoid direct water, splashing, or wet-zone installation unless the product label confirms its protection rating.
• Handle the borosilicate glass diffuser carefully to prevent cracks or breakage.
• Make sure the wall and mounting hardware can securely support the fixture.
• Clean the lamp using a soft, dry cloth.
• Contact a qualified electrician if you are unfamiliar with hardwired wall-light installation.