Product Specifications

Product Type: Surface-Mounted Ceiling Light
Model Number: M001
Style: Modern
Materials: Stone, Gypsum, and Wood
Finish: Frosted
Light Source: Energy-Saving Light
Number of Light Sources: 1
Bulb Included: Yes
Dimmable: Yes
Switch Type: Knob Switch
Luminous Flux: 249–2,000 Lumens
Power Source: AC
Voltage: 90–260V
Installation Type: Surface Mounted
Installation Method: Self-Contained
Recommended Coverage: 32–54 sq ft (3–5 m²)
Smart Device: No
PCBA Included: Yes
Warranty: 2 Years
Certification: CE
Origin: Mainland China

Installation Guide

General Guidelines

• Designed for surface-mounted ceiling installation using a self-contained method.
• Suitable for indoor areas measuring approximately 3–5 square meters.
• Features a modern design with a frosted finish.
• Made from stone, gypsum, and wood materials.
• Uses one included energy-saving light source.
• Operates on 90–260V AC power.
• Supports dimmable lighting.
• Operates using a knob switch.
• Turn off the main electrical supply before installation.

Tools You May Need

• Screwdriver
• Step ladder
• Voltage tester
• Measuring tape
• Mounting hardware supplied with the fixture, if included

Installation Steps

Step 1: Unpack and Inspect – Remove all packaging and check the stone, gypsum, and wooden components, included light source, mounting base, and installation hardware for damage or missing parts.

Step 2: Turn Off the Power – Switch off the ceiling-light circuit at the breaker panel. Use a voltage tester to confirm that the ceiling wiring is not live.

Step 3: Prepare the Installation Area – Select a suitable ceiling location and ensure there is enough space for the complete surface-mounted fixture.

Step 4: Position the Mounting Base – Hold the mounting bracket or ceiling base against the ceiling and align it with the electrical connection point.

Step 5: Secure the Mounting Base – Attach the base firmly to the ceiling using the appropriate screws and supplied mounting hardware.

Step 6: Connect the Power Supply – Connect the ceiling light to a compatible 90–260V AC power supply according to the included wiring instructions. Ensure all connections are secure and properly insulated.

Step 7: Attach the Fixture – Align the assembled ceiling light with the installed mounting base and secure it firmly. Handle the stone and gypsum sections carefully during mounting.

Step 8: Check the Light Source – Confirm that the included energy-saving light source is correctly installed and securely seated.

Step 9: Restore Power and Test – Turn the electrical power back on. Use the knob switch to test the light and dimming function.

Important Tips

• Confirm that the available power supply is within the supported 90–260V AC range.
• Use only a compatible dimming control with the fixture.
• Do not install, adjust, or clean the ceiling light while the power is on.
• Handle the stone and gypsum materials carefully to prevent chips, cracks, or breakage.
• Avoid overtightening screws near the stone, gypsum, or wooden components.
• Make sure the ceiling mount can securely support the complete fixture.
• Clean the frosted surface and body materials using a soft, dry cloth.
• Contact a qualified electrician if you are unfamiliar with ceiling wiring or surface-mounted installation.